Search Catalog

Operating Hours

Mon - Thu 8am-5pm EST

Fri 8am–4:30pm EST

Multi Cartridge Housings

View PDF

HMC Multi Cartridge Housings

Municipal / Industrial

Designed to accept 30” or 40” Nominal Length Cartridges.

HMC Series Filter Housings are designed with a universal bottom plate to accept 2-3/4” or 2-1/2” diameter cartridges with DOE (double open end), 222 / Flat and 222 / Fin end cap configurations.

Features

  • 304 stainless steel construction, standard
  • Built to ASME design standards
  • Bead blast finish, standard
  • Two gauge ports – inlet and outlet sides
  • Two drains provided – inlet and outlet fluids
  • Adjustable top plates to accept 30” or 40” nominal length cartridges
  • Assisted davit arm closure – 12 round and larger
  • 304 stainless steel components – includes cap/spring and V post, standard
  • 150 PSI (10.3 bar) pressure rating
  • Multiple hold-down plates to accept DOE, 222/Flat and 222/Fin style cartridges

Options:
ASME Code U-stamp
Electropolished
316L stainless steel construction

Applications
  • Industrial Waste Water Treatment
  • Industrial Process (High Purity) Applications
  • Ground Water Under Direct Influence (GUDI)
  • Surface Water Treatment Rule (SWTR) LT2
  • Reverse Osmosis Pre-filtration
  • Municipal Drinking Water
  • Cooling Tower Filtration
  • Ground Water Remediation

Note: This publication is to be used as a guide. The data within has been obtained from many sources and is considered to be accurate. Harmsco does not assume liability for the accuracy and/or completeness of this data. Changes to the data can be made without notification. Temperature, Pressure, Flow Rates, Differential Pressures, Chemical Combinations and other unknown factors can affect performance in unknown ways. Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.

Have a question about our line of products? We are here to help.