BCB – Harmsco® Band Clamp Bag Housings
BCB – Harmsco® Band Clamp Bag Housings
Commercial Grade
Designed with Snap Fit “V” Ring Bag
Features
- 304 stainless steel construction, standard
- Electropolished finish, standard
- 150 psi (10.3 bar) pressure rating
- Flow rates up to 200 gpm
- All filter housings hydrostatically tested
- Band clamp closure to simplify maintenance
- Internal parts are 304 stainless steel
- Drill in-place legs
- Patented Extended Area replacement bags available (approx. 30% more surface area vs. Std. bags)
- 1.5” FNPT or 2” FNPT connections available
- 316L stainless steel perforated basket, standard
Options:
316L stainless steel
Chemical resistant coating
- Paint
- Lubricants
- Process Water
- Solvents
- Plating Solutions
- Hydraulic Fluids
- Coatings
- Industrial Waste Water Treatment
- Cutting Fluids
- Ground Water Remediation
Note: This publication is to be used as a guide. The data within has been obtained from many sources and is considered to be accurate. Harmsco does not assume liability for the accuracy and/or completeness of this data. Changes to the data can be made without notification. Temperature, Pressure, Flow Rates, Differential Pressures, Chemical Combinations and other unknown factors can affect performance in unknown ways. Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.