0

(800) 327-3248
(561) 848-9628
MONDAY - FRIDAY 8AM - 5PM EST

SureSeal™ Microfiber

Microfiber SureSeal Cartridges

Designed Specifically For Filter Housings That Utilize 4-1/2” O.D. High Flow Cartridges

Agion Silver Zeolite is
FDA Tested and EPA Registered

EPA Registration No. 71227-1-72854
EPA Establishment No. 72854-MA-001

 
Harmsco® uses the patented dual durometer endcaps to provide superior sealing characteristics for Big Blue® and other 41⁄2” style cartridge filter housings. The overall length of the cartridge alone is 1⁄4” over standard but when installed in the housing, it is designed to compress and operate as normal.

Details

Features

  • Soft one-time use seals ensure a positive seal in most Big-Blue* style cartridge filter housings
  • Absolute rated one micron filter media removes cyst-sized particles for safe, cyst-free drinking water
  • Pleated microfiber filter media provides more surface area for longer filter life and increased particle removal
  • FDA listed materials for use in potable water and liquid food applications
  • End caps, center tubes and media are thermally bonded as one integral component for added strength and to provide superior end sealing
*Big-Blue is a registered trademark of Plymouth Products, Inc.

Applications

  • Commercial/Residential Drinking Water Filtration
  • Water Bottling Filtration
  • Reverse Osmosis Pre-filtration
  • Desalination Pre-filtration
  • Industrial Water Filtration
  • Chill Water Loop Filtration
  • Marine/Aquatic Filtration
  • Food & Beverage Filtration

Note: This publication is to be used as a guide. The data within has been obtained from many sources and is considered to be accurate. Harmsco does not assume liability for the accuracy and/or completeness of this data. Changes to the data can be made without notification. Temperature, Pressure, Flow Rates, Differential Pressures, Chemical Combinations and other unknown factors can affect performance in unknown ways. Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.

View Products