0

(800) 327-3248
(561) 848-9628
MONDAY - FRIDAY 8AM - 5PM EST

PES All-Poly Absolute Rated Water Service Grade

PES All-Poly Absolute Rated Water Service Grade

Absolute Rated
Hydrophilic Polyethersulfone Membrane Cartridges

Harmsco® High Purity Pleated Cartridges are manufactured for use in most applications where absolute rated filtration is needed.

 
Long service life
High flow rates
Low pressure drop
High permeability

 

Features

  • 100% polypropylene; nothing to leach / contaminate
  • High efficiency for critical filtration applications Pleated design for extended surface area
  • Polypropylene end cap, thermally welded to media, cage and core
  • USP Class VI - 121˚C (250˚F) for plastics
  • 5.5 square feet of filtration media per 9-3/4” cartridge
  • Offered in multiple lengths and end cap configurations to fit in competitive filter housings
  • FDA Listed Materials: Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations

Applications

  • Deionized Water Systems
  • Recirculating Fluids
  • General-use Water Filtration
  • Chemical Filtration
  • Liquid Clarification
  • Cosmetics
  • Pharmaceutical
  • Final Filtration of Solvents, Acids, Bases

Specifications

  • Construction Materials
    Membrane ........................ Polyethersulfone (PES)
    Support Media ............................. Polypropylene
    End Caps ...................................... Polypropylene
    Center Core .................................. Polypropylene
    Outer Support Cage .................... Polypropylene
    O-rings / Gaskets .................Buna, Viton, EPDM, Silicone, Teflon® Encapsulated Viton
  • Toxicity
    All polypropylene components meet the specifications for biological safety per USP Class VI: 250˚F (121˚C) for plastics.
  • Dimensions
    Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
    Outside Diameter: 2.7 inches (7.0 cm) nominal
  • Media Surface Area
    5.5 square feet per 9-3/4” length
  • Maximum Recommended Operating Conditions
    Temperature ...........................176°F (80°C)
  • Maximum Differential Pressures
    Forward ............... 50 psi (3.4 bar) at 68°F (20°C)
    Reverse................ 40 psi (2.7 bar) at 68°F (20°C)
  • FDA Listed Materials
    Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.
  • Sanitization
    Filtered Hot Water ............190°F (88°C) for 30 minutes at a maximum of 15 psid. Cartridges are chemically compatible

Cartridge Selection Guide

 

Note: This publication is to be used as a guide. The data within has been obtained from many sources and is considered to be accurate. Harmsco does not assume liability for the accuracy and/or completeness of this data. Changes to the data can be made without notification. Temperature, Pressure, Flow Rates, Differential Pressures, Chemical Combinations and other unknown factors can affect performance in unknown ways. Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.