0

(800) 327-3248
(561) 848-9628
MONDAY - FRIDAY 8AM - 5PM EST

Calypso Blue™ Cartridges

Calypso Blue™ Cartridges

Industrial and Residential

Premium and WaterBetter® Series

Designed for 4-1/2” diameter filter housings.

 
Lower overall operating cost
Longer filter runs for fewer change outs
Lower initial pressure drops
Reduced maintenance down time and cost
Increased contaminant removal
High flow capability

Features

  • Pleated design for more surface area
  • FDA approved materials - NSF 61 certified
  • Engineered media for superior performance
  • Cleanable and reusable in most applications and micron sizes
  • Thermally bonded end caps to ensure better sealing
  • Full product line - largest selection of micron ratings

Applications

  • Reverse Osmosis Pre-filtration
  • Municipal Drinking Water Filtration
  • Commercial/Residential Drinking Water Filtration
  • Desalination Pre-filtration
  • Industrial Water Filtration
  • Cooling Tower Filtration
  • Chill Water Loop Filtration
  • Food & Beverage Filtration
  • Marine/Aquatic Filtration


Specifications

  • Nominal Micron Ratings: 0.35, 1, 5, 20, 50 microns;
  • Absolute Micron Rating: 1 micron
  • Filter Media: Polyester-Plus™, Synthetic Fiber
  • End Caps: Pliable PVC or Urethane
    Shrink Wrap: Standard on all Premium and WaterBetter® Calypso cartridges
  • Temperature: up to 140°F (60°C)
  • Center Tubes: ABS or PVC

Cartridge Selection Guide

 

Note: This publication is to be used as a guide. The data within has been obtained from many sources and is considered to be accurate. Harmsco does not assume liability for the accuracy and/or completeness of this data. Changes to the data can be made without notification. Temperature, Pressure, Flow Rates, Differential Pressures, Chemical Combinations and other unknown factors can affect performance in unknown ways. Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.